EtherFast Cable/DSL VPN Router with 4-Port 10/100 Switch
Obtain an IP Automatically - DHCP
If your ISP says that you are connecting through DHCP or a dynamic IP address from your ISP, perform these
steps:
A. Select Obtain an IP automatically as the Connection Type.
B. Click the Save Settings button to save the setting, or click the Cancel Changes button to clear the setting
and start over. When you are finished, then proceed to step 5.
Static IP
If your ISP says that you are connecting through a static or fixed IP address from your ISP, perform these steps:
A. Select Static IP as the Connection Type.
B. Enter the IP Address.
C. Enter the Subnet Mask.
D. Enter the Gateway Address.
E. Enter the DNS in the 1, 2, and/or 3 fields. You need to enter at least one DNS address.
F. Click the Save Settings button to save the settings, or click the Cancel Changes button to clear the settings
and start over. When you are finished, then proceed to step 5.
Chapter 5: Configuring the Router
Obtain an IP Automatically - DHCP
Figure 5-3: Basic DHCP Setup
Figure 5-4: Basic Static IP Setup
13