EtherFast Cable/DSL VPN Router with 4-Port 10/100 Switch
The Front Panel
The Router's LEDs, which inform you about network activities, are located on the front panel.
Power
Green. The Power LED lights up when the Router is powered on. If the LED is flashing, the
Router is running a diagnostic test.
Ethernet
Green. The Ethernet LED serves two purposes. If the LED is continuously lit, the Router is
connected to a device through the corresponding port (1, 2, 3, or 4). If the LED is flashing, the
Router is actively sending or receiving data over that port.
Internet
Green. The Internet LED lights up when the Router is connected to your cable or DSL modem.
Proceed to "Chapter 4: Connecting the Router."
Chapter 3: Getting to Know the Router
The Front Panel
Figure 3-2: Front Panel
8