Table of Contents
Advertisement
EtherFast Cable/DSL VPN Router with 4-Port 10/100 Switch
• VPN. To enable and setup VPN Passthrough and configure up to 50 VPN tunnels, use this screen.
Access Restrictions
• Internet Access. From this screen, you will be able to manage Internet access, blocking websites, from your
network.
Applications & Gaming
• Port Range Forwarding. You can set up public services or other specialized Internet applications on your
network from this screen.
• Port Triggering. Set up triggered ranges and forwarded ranges for Internet applications from this screen.
• UPnP Forwarding. Use this screen to alter UPnP forwarding settings.
• DMZ. To allow one local user to be exposed to the Internet for use of special-purpose services, use this
screen.
Administration
• Management. On this screen, alter the Router's password, access privileges, and UPnP settings.
• Log. You can view or save, even email, activity logs from this screen.
• Diagnostics. From this screen, you can test network performance and connections.
• Factory Defaults. If you want to restore the Router's factory defaults, then use this screen.
• Firmware Upgrade. From this screen, you can upgrade the Router's firmware.
Status
• Gateway. This screen provides status information about the Router and your Internet connection.
• Local Network. This provides status information about the local network.
Chapter 6: Using The Router's Web-based Utility
Navigating the Utility
upgrade: to replace existing software or
firmware with a newer version
17
Advertisement
Table of Contents
