Setting Up Bluetooth Sim Access For Car Kit Phones - HTC Touch cruise User Manual

6 Using Phone Features

2.7 Setting Up Bluetooth SIM Access for Car Kit Phones

Bluetooth car kits that support the SIM Access Profile (SAP) can connect to your
device and access its SIM card via Bluetooth. Once a SAP connection has been
established, you can download SIM contacts from your device to the car kit phone.
You can also use the car kit phone to answer and make calls using your device's SIM
card.
Note
To enable downloading contacts onto the car kit, ensure that all contacts on the
device are stored in the SIM card and not in the device memory. Configure the car kit
to download contacts only from the SIM card.
1.
On your device, make sure that Bluetooth is turned on. For information about
turning on Bluetooth, see "Bluetooth Modes" in Chapter 9.
2. On the Home screen, slide to the Settings tab and then tap Menu >
Bluetooth Devices > SIM Access tab.
3. Select the Remote SIM Access check box, then tap OK.
4.
Connect the car kit phone to your device via Bluetooth. To learn how to
connect, consult your car kit phone's manual.
5.
If this is the first time you are pairing the car kit phone with your device, enter
the car kit's passcode on your device.
6. A pop-up message should appear on your device saying that a connection
has been established between your device and car kit phone. Tap OK.
Note
You will not be able to make/receive calls, send/receive messages or perform related
activities on your device when the SIM Access Profile connection is active. You'll be
able to do all these from the car kit phone during this time. After the connection is
disconnected, you will be able to use your device as before.