Using Block Recognizer - HTC Touch cruise User Manual

To lock the keyboard in Numeric and Symbol mode
By default, the keyboard returns to the letter keyboard layout after you enter
a symbol. If you need to enter several symbols consecutively, you can set the
keyboard to remain in Numeric and Symbol mode.
1. Tap the Input Selector arrow and then tap Other Input Methods > Options.
2. In the Input Method tab, select a Touch input method in the Input method
list, and then tap Options.
3. Clear the Turn on one-touch symbol entry check box.
Tip
In Compact QWERTY and Phone Keypad, tap
the keyboard in Numeric and Symbol mode and switching back to the letter keyboard
layout after tapping a symbol.

4.7 Using Block Recognizer

With Block Recognizer, you use a single stroke to write letters, numbers, symbols,
and punctuation, which are then converted into typed text.
To use Block Recognizer
1. From a program, tap the Input Selector arrow and then tap Other Input
Methods > Block Recognizer.
2.
Write characters, numbers, and symbols in the designated writing area.
• Enter letters by writing in the abc (left) area of the box.
• Enter numbers by writing in the 123 (right) area of the box.
•
Enter symbols and punctuation by tapping the left or right area of the box
(a gray dot appears), then writing the desired character.
Tip
For help with writing characters, tap the question mark near the writing area.
Entering Text 9
/ to toggle between locking