Adding E-Mail Destinations - Axis 7000 User Manual

Using the AXIS 7000
22

Adding E-mail Destinations

The e-mail list resident within the AXIS 7000 is initially created by your
administrator. If you want to send a document to an e-mail destination that is not
featured in the list, you can add a temporary e-mail destination using either:
• a standard PC keyboard, or
• any standard Web browser
Using a standard PC Keyboard
Connecting a standard keyboard to your AXIS 7000 will allow you to quickly search
for any destination names within the resident list. You can do this by simply typing in
the first couple of characters of the destination name you wish to search. The AXIS
7000 message display will automatically show the destination that best matches the
keyboard input.
Adding a new e-mail address to the list:
1. If the keyboard is not already connected, make sure that the power supply to the
AXIS 7000 is disconnected and connect the keyboard to the keyboard connector
located on the rear panel. Reconnect the power supply.
2. Press the Insert key on your keyboard. The following prompt will appear on the
message display:
Add address:
3. Type the new e-mail address you want to add, and press Enter.
Note:
Only the five most-recently added temporary destinations will appear in the destination list.
Contact your Network Administrator if you want to add a destination permanently.
AXIS 7000 User's Guide