About This Document; Safety Notices; Copyright Information; Support Services - Axis 7000 User Manual

2

About This Document

This guide applies to the AXIS 7000 Network Document Server
with software release 2.10 and subsequent releases until
otherwise notified.
The document provides introductory information as well as
instructions on how to set up and manage the AXIS 7000. It is
intended for anyone involved in installing and using the AXIS
7000.
For more detailed instructions, refer to the AXIS 7000 User's
Manual that is available in online format at the Axis Website and
on the AXIS Online CD.

Safety Notices

Take some time to read through the safety notices before
installing the AXIS 7000. Please observe all safety markings and
instructions when using this product.
Caution! -
must be observed to avoid loss of data or damage
to your equipment.
Important: -
must be observed to avoid operational
impairment.
Do not proceed beyond any of the above notices, until you have
fully understood the implications.

Copyright Information

The unauthorized copying of materials that are covered by
copyright and other international proprietary or intellectual
property rights is prohibited in most countries. Axis
Communications AB recommends that the users of this
equipment seek the necessary authorizations for copying
material. The instructions for use in the manual shall not be
considered as an inducement to make illicit duplications of
material. Any duplication will be made at the user's own risk.
Electromagnetic Compatibility (EMC)
USA - This equipment generates, uses, and can radiate radio
frequency energy and if not installed and used in accordance
with the instruction manual, may cause interference to radio
communications. It has been tested and found to comply with
the limits for a Class A computing device pursuant to Subpart B
of Part 15 of FCC rules, which are designed to provide
reasonable protection against such interference when operated in
a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the
user at his/her own expense will be required to take whatever
measures may be required to correct the interference. Shielded
cables should be used with this unit to ensure compliance with
the Class A limits.
Europe -
This digital equipment fulfils the requirements for
radiated emission according to limit B of EN55022, and the
AXIS COMMUNICATIONS
<Product Name> Quick User's Guide
AXIS 7000 User's Guide
requirements for immunity according to EN55024 residential,
commercial, and light industry (Compliance is not valid for
unshielded network cables).
Liability
Every care has been taken in the preparation of this manual; if you
detect any inaccuracies or omissions, please inform your local Axis
office which can be found on the cover of this document. Axis
Communications AB cannot be held responsible for any technical or
typographical errors and reserves the right to make changes to the
product and manuals without prior notice. Axis Communications AB
makes no warranty of any kind with regard to the material contained
within this document, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose.
Axis Communications AB shall not be liable nor responsible for
incidental or consequential damages in connection with the
furnishing, performance or use of this material.
Trademark Acknowledgments
Acrobat, Adobe, AIX, DOS, Ethernet, IBM, Internet Explorer,
Macintosh, Microsoft, Netscape Navigator, OS/2, UNIX and
Windows are registered trademarks of the respective holders.
Software Trademark Acknowledgments
JPEG code (libjpeg) used courtesy of the Independent JPEG Group.
LDAP code (libldap and libber) used courtesy of the University of
Michigan at Ann Arbor. Copyright © 1991 Regents of the University
of Michigan. All rights reserved. TIFF code (libtiff) used courtesy of
Sam Leffler and Silicon Graphics, Inc. Copyright © 1988-1996 Sam
Leffler. Copyright © 1991-1996 Silicon Graphics, Inc.
Maintenance
It is recommended that you use a moist cloth to clean the unit. Do
not use petroleum based substances as this may cause damage.

Support Services

Should you require any technical assistance, please contact your local
dealer. If your questions cannot be answered immediately, your dealer
will forward your queries through the appropriate channels to ensure
you a rapid response. If you are connected to Internet, you can find
online manuals, technical support information, software updates,
application software, information about Axis etc. at the locations
listed below.
WWW: http://www.axis.com
FTP server: ftp://ftp.axis.com/pub/axis
AXIS 7000 User's Guide
Revision 2.0 Part No: 16541
Dated: January 2000
Copyright © Axis Communications AB,
1997 - 2000