Adding Temporary E-Mail Destinations - Axis 700 User Manual

Network scan server

Hide thumbs Also See for 700:

Table of Contents

AXIS 700 User's Guide

Multipage Image Files -

one image file. This applies to the TIFF and PDF formats only. To utilize this feature, you must

use a scanning profile with the Multipage Documents parameter set to All pages in one file. This is

the default setting.

Notes:

• The JPEG format always sends each page as one separate image file.

• Not all TIFF viewers support multipage image files. In this case, you must use a scanning

profile with the Multipage Documents parameter set to Separate file for each page, or scan

each page using Send

Job Separation Sheets -

with the Canon DR-3020 scanner. A job separation sheet inserted in a stack of paper will divide the

scanning job into separate image files. Other separation pages will be ignored.

Adding Temporary E-mail Destinations

If you want to send a scanned document to an e-mail destination that does not appear in the

destination list on the AXIS 700 display, you can add a temporary e-mail destination using the

Web browser interface.

1. Start the Web browser.

2. Enter the name or Internet address of your AXIS 700 on the location/address line. This brings

you to the AXIS 700 Home Page.

Example:

http://172.16.253.80

3. Click Destinations. The table lists the available destinations.

4. Click New Destination and specify the settings for the new destination.

5. Click OK to save the destination temporarily. Note that only the five most-recently added

temporary destinations will appear in the destination list. Contact your Network

Administrator if you want to add a destination permanently.

When scanning multiple pages, you can accumulate all the pages in

The AXIS 700 supports the job separation sheets that can be used

Using the AXIS 700

Table of Contents