Adding Temporary Destinations - Axis 7000 User Manual

88 Using the Document Server
Job Separation Sheets
Paper Orientation on
Digital Copiers
(AXIS 7000)

Adding Temporary Destinations

Notes:
• The JFIF format sends each page as one separate image file.
• The PCL format sends several pages in a single PCL file.
• Web browsers not supporting multipage image files require that the Mul-
tipage Documents parameter is set to Separate file for each page. Alter-
natively, scan each page using the Send button.
• Double-sided is only available if the scanner device supports duplexing.
The Document Server supports the job separation sheets that can be
used with certain scanner devices. A job separation sheet inserted
in a stack of paper will divide the scanning job into separate image
files. Other separation pages will be ignored. Visit the Axis Web site
at http://www.axis.com/techsup for a comprehensive list of
supported scanner devices with this feature.
To receive an upright image, the setting should be "Portrait" and
the paper should be placed with the short-edge in the ADF
(Automatic Document Feeder) or in the A4-R position on the
flatbed inside the digital copier. This is true for all the supported
digital copiers except Sharp AR-series which always supports the
same orientation as when copying, i.e. long-edge first.
Note:
The PDF rotation option can be used to enable the same feeder orientation as
when copying, i.e long-edge first.
The e-mail list resident within the Document Server is initially
created by your administrator. If you want to send a scanned
document to an e-mail destination that is not featured in the list,
you can add a temporary e-mail destination using either:
• standard PC keyboard
• standard Web browser
AXIS 70U/7000 User's Manual