Wall Mount Installation - White Mountain Hearth VFBL-30-1 Installation Instructions And Owner's Manual

Refer to Figure 8 for measurements to attach wall bracket and
heater onto wall. Figure 8 is the front view of heater.
Attachment of Heater Onto Wall Using 10 x 1-1/2" Screws
Attention: Use 10 x 1-1/2" screws to mount heater onto wall
whenever you can use 16" on-center wall studs for attachment
of heater onto wall.
1. Refer to Figure 7 for attachment of (2) standoffs to heater back
with (2) 8 x 3/4" screws.
2. Remove casing front from heater.
3. Locate (2) 16" on-center wall studs. Attach wall bracket to 16"
on-center wall studs with (2) 10 x 1-1/2" screws.
4. Align slots on heater with wall bracket and pivot heater onto
wall bracket.
5. Align clearance hole on interior, left of heater with screw hole
on wall bracket. Attach heater to wall bracket with (1) 10 x
1/2" screw.
6. Installation of heater onto wall is completed.
16940-2-0806

WALL MOUNT INSTALLATION

Figure 7
Figure 8
Refer to Figure 8 for measurements to attach wall bracket and
heater onto wall. Figure 8 is the front view of heater.
Attachment of Heater Onto Wall Using Plastic Expansion An-
chors
Attention: Use must use plastic expansion anchors to mount heater
onto wall whenever you cannot use 16" on-center wall studs for
attachment of heater onto wall.
1. Refer to Figure 7 for attachment of (2) standoffs to heater back
with (2) 8 x 3/4" screws.
2. Remove casing front from heater.
3. Position wall bracket in correct location on wall. Use clearance
holes on wall brackets to mark (2) mounting holes on wall.
4. After locating mounting holes, drill (2) 5/16" diameter holes
into wall.
5. Insert (2) plastic expansion anchors into (2) 5/16" holes.
6. Attach wall bracket to plastic expansion anchors with (2) 10
x 1" screws. Refer to Figure 9.
7. Align slots on heater with wall bracket and pivot heater onto
wall bracket.
8. Align clearance hole on interior, left of heater with screw hole
on wall bracket. Attach heater to wall bracket with (1) 10 x
1/2" screw.
9. Installation of heater onto wall is completed.
Figure 9
Page 9