Specifications And Options; I Specifications - Icom IC-FR3100 Instruction Manual

6

SPECIFICATIONS AND OPTIONS

I Specifications
Specifications are measured in accordance with EN 300 086.
D D IC-FR3100
General
• Frequency coverage
• Channel spacing
• PLL channel step
• Frequency stability
• Number of channels
• Antenna connector
• Operating temp. range
• Power supply voltage
• Current drain (at 13.2 V) : TX high (25 W)
• Dimensions
(Projections not included)
• Weight (approx.)
Transmitter
• RF output power
• Modulation system
• Max. frequency deviation : ±5.0 kHz (Wide),
• Spurious emissions
• Adjacent channel power : More than 70 dB
• Intermodulation attenuation : More than 40 dB
• Audio harmonic distortion : 3.0% typical
• Microphone impedance
All stated specifications are subject to change without notice or obligation.
15
: 150.000–174.000 MHz
: 12.5/25.0 kHz (Narrow/Wide)
12.5/20.0 kHz (Narrow/Middle)
: 5.0, 6.25 kHz
: ±1.0 kHz
: Max. 32 channel
: Type-N × 2 (50 Ω)
: –25°C to +55°C
: 220–240 V AC (50/60 Hz)
13.2 V DC (negative ground)
10.0 A
Max. audio 2.0 A
Stand-by 1.0 A
: 410(W) × 110(H) × 360(D) mm
: 12 kg
: 25 W
: Variable reactance frequency
modulation system
±4.0 kHz (Middle),
±2.5 kHz (Narrow)
: Less than 0.25 µW
(Wide, Middle),
More than 60 dB (Narrow)
(at 1 kHz, 40% deviation)
: 600 Ω (8-pin modular)
Receiver
• Receive system : Double conversion
• Sensitivity (20 dB SINAD) : 0 dBµV (EMF) typical
• Intermediate frequencies : 1st; 31.65 MHz, 2nd; 455 kHz
• Adjacent channel selectivity : More than 70 dB
• Spurious response : More than 70 dB
• Intermodulation : More than 70 dB
• Audio output power : 2.5 W typical at 10% distortion
• External speaker connector: 2-conductor 3.5 (d) mm (
D D IC-FR4100
General
• Frequency coverage : 400.000–430.000 MHz
(Depends on version)
• Channel spacing : 12.5/25.0 kHz (Narrow/Wide)
• PLL channel step : 5.0, 6.25 kHz
• Frequency stability : ±1.0 kHz
• Number of channels : Max. 32 channel
: Type-N × 2 (50 Ω)
• Antenna connector
• Operating temp. range : –25°C to +55°C
• Power supply voltage : 220–240 V AC (50/60 Hz)
• Current drain (at 13.2 V) : TX high (25 W)
: 410(W) × 110(H) × 360(D) mm
• Dimensions
(Projections not included)
• Weight (approx.) : 12 kg
superheterodyne system
(Wide, Middle),
More than 60 dB (Narrow)
with a 4 Ω load
") 4 Ω
1 ⁄
8
450.000–480.000 MHz
12.5/20.0 kHz (Narrow/Middle)
13.2 V DC (negative ground)
12.0 A
Max. audio 2.0 A
Stand-by 1.0 A