Specifications And Options; I Specifications; D Ic-Fr3000; D Ic-Fr4000 - Icom FR3000 02 Instruction Manual

6

SPECIFICATIONS AND OPTIONS

I Specifications
Specifications are measured in accordance with EIA/TIA-603.
D D IC-FR3000
General
• Frequency coverage
• Channel specing
• PLL channel step
• Frequency stability
• Number of channels
• Antenna connector
• Operating temp. range
• Power supply voltage
• Current drain (at 13.6 V) : TX high (50 W)
• Dimensions
(Projections not included) 16
• Weight (approx.)
Transmitter
• RF output power
• Modulation system
• Max. frequency deviation : ±5.0 kHz (Wide),
• Spurious emissions
• Adjacent channel power : More than 70 dB (Wide),
• Audio harmonic distortion : 3.0% typical
• Hum and noise
• Microphone impedance
All stated specifications are subject to change without notice or obligation.
15
: 150.000–174.000 MHz*
148.000–172.000 MHz*
* Depends on version
: 12.5/25.0 kHz (Narrow/Wide)
: 5.0, 6.25 kHz (2.5 kHz repeater
operation only)
: ±2.5 ppm
: Max. 32 channel
: Type-N × 2 (50 Ω)
: –30°C to +60°C
(–22°F to +140°F)
: 100–120 V AC (50/60 Hz)*
220–240 V AC (50/60 Hz)*
13.6 V DC (negative ground)
* Depends on version
15.0 A
Max. audio 2.0 A
Stand-by 1.0 A
: 410(W) × 110(H) × 360(D) mm
(W) × 4 (H) × 14
1 1 1
⁄ ⁄ ⁄ (D) in
3 3 4
: 12 kg; 26 lb 7 oz
: 50 W
: Variable reactance frequency
modulation system
±2.5 kHz (Narrow)
: 70 dB
More than 60 dB (Narrow)
(at 1 kHz, 40% deviation)
: More than 40 dB (Wide),
More than 34 dB (Narrow)
: 600 Ω (8-pin modular)
Receiver
• Receive system : Double conversion
• Sensitivity (12 dB SINAD) : 0.25 µV typical
• Intermediate frequencies : 1st; 31.65 MHz, 2nd; 455 kHz
• Adjacent channel selectivity : More than 70 dB (Wide),
• Spurious response : More than 70 dB
• Intermodulation : More than 70 dB
• Hum and noise : More than 40 dB (Wide),
• Audio output power : 2.5 W typical at 10% distortion
• External speaker connector: 2-conductor 3.5 (d) mm (
D D IC-FR4000
General
• Frequency coverage : 400.000–430.000 MHz*
• Channel specing : 12.5/25.0 kHz (Narrow/Wide)
• PLL channel step : 5.0, 6.25 kHz
• Frequency stability : ±1.5 ppm*/±2.5 ppm*
• Number of channels : Max. 32 channel
: Type-N × 2 (50 Ω)
• Antenna connector
• Operating temp. range : –30°C to +60°C
• Power supply voltage : 100–120 V AC (50/60 Hz)*
• Current drain (at 13.6 V) : TX high (50 W)
: 410(W) × 110(H) × 360(D) mm
• Dimensions
(Projections not included) 16
• Weight (approx.) : 12 kg; 26 lb 7 oz
superheterodyne system
More than 60 dB (Narrow)
More than 34 dB (Narrow)
with a 4 Ω load
") 4 Ω
1 ⁄
8
430.000–450.000 MHz*
450.000–480.000 MHz*
* Depends on version
* Depends on version
(–22°F to +140°F)
220–240 V AC (50/60 Hz)*
13.6 V DC (negative ground)
* Depends on version
20.0 A
Max. audio 2.0 A
Stand-by 1.0 A
(W) × 4 (H) × 14
1 1 1
⁄ ⁄ ⁄ (D) in
3 3 4