Mounting The Front And Surround Speakers - Yamaha DVX-S60 Owner's Manual

Mounting the front and surround speakers
Mount the speakers on a shelf, rack or directly on the floor, or hang them
on the wall.
To mount the speakers on a wall by using the holes on the
speakers' back panels
Placing the the front/surround speakers
When placing the speakers on a flat surface, attach the included nonskid
pads to the corners on the bottom of the speakers. This prevents the
speakers from sliding around.
1. Fasten screws into a firm wall or wall support as shown in the figure.
Diam. 3.5-4 mm
2 Hang the speaker by mounting the holes on the protruding screws.
• Make sure that the screws are securely caught by the narrow parts
of the holes
Nonskid pads
If you want to mount a speaker on a commercially available
speaker stand for the front/surround speakers
The provided mounting bracket with 1 pair of screw holes (at an interval
of 60 mm) can be used to mount the speaker on a speaker stand.
*
Those screw holes can be used with M4 screws only.
0
~
B
n
70mm
70mm
~
Round head screw
(not supplied)
60mm
WARNING
• Each speaker weighs 0.9 kg (2 Ibs.). Do not mount them on thin
plywood or a wall composed of a soft surface material. If
mounted, the screws may pUll out of the flimsy surface and the
speakers may fall. This may damage the speakers or cause
personal injury.
• Do not affix the speakers to a wall using nails, adhesives, or any
other unstable hardware. Long-term use and vibrations may
cause the speakers to fall.
• To avoid accidents resulting from tripping over loose speaker
cables, fix the cables to the wall.
• Select an appropriate position on the wall to mount the speaker
so that no one will injure his/her head or face.
Attach the bracket to the bottom of the speaker by using the provided
screw so that the convex part of the bracket fits in the grooved part on
the bottom of the speaker
Mounting
bracket
Using the Yamaha Speaker Stand SPS-80 (option)
By using the Yamaha Speaker Stand SPS-80, speakers can be placed on
the floor.
2. Mount the speaker on the speaker stand by using the screw holes on
the bracket
Note.
The mounting bracket is provided for each speaker
Note:
Be careful not to let the speaker system fall, it might cause damage
or serious injuries.
If you use another speaker system, please change the settings of
"Speaker" under "SETTINGS ON THE SET UP MENU" to the
proper settings for the speaker system (See Page 17 )
*
The SPS-80 is not available in some areas.
c 7
Mounting the front and surround speakers
Mount the speakers on a shelf, rack or directly on the floor, or hang them
on the wall.
To mount the speakers on a wall by using the holes on the
speakers' back panels
Placing the the front/surround speakers
When placing the speakers on a flat surface, attach the included nonskid
pads to the corners on the bottom of the speakers. This prevents the
speakers from sliding around.
1. Fasten screws into a firm wall or wall support as shown in the figure.
Diam. 3.5-4 mm
2 Hang the speaker by mounting the holes on the protruding screws.
• Make sure that the screws are securely caught by the narrow parts
of the holes
Nonskid pads
If you want to mount a speaker on a commercially available
speaker stand for the front/surround speakers
The provided mounting bracket with 1 pair of screw holes (at an interval
of 60 mm) can be used to mount the speaker on a speaker stand.
*
Those screw holes can be used with M4 screws only.
0
~
B
n
70mm
70mm
~
Round head screw
(not supplied)
60mm
WARNING
• Each speaker weighs 0.9 kg (2 Ibs.). Do not mount them on thin
plywood or a wall composed of a soft surface material. If
mounted, the screws may pUll out of the flimsy surface and the
speakers may fall. This may damage the speakers or cause
personal injury.
• Do not affix the speakers to a wall using nails, adhesives, or any
other unstable hardware. Long-term use and vibrations may
cause the speakers to fall.
• To avoid accidents resulting from tripping over loose speaker
cables, fix the cables to the wall.
• Select an appropriate position on the wall to mount the speaker
so that no one will injure his/her head or face.
Attach the bracket to the bottom of the speaker by using the provided
screw so that the convex part of the bracket fits in the grooved part on
the bottom of the speaker
Mounting
bracket
Using the Yamaha Speaker Stand SPS-80 (option)
By using the Yamaha Speaker Stand SPS-80, speakers can be placed on
the floor.
2. Mount the speaker on the speaker stand by using the screw holes on
the bracket
Note.
The mounting bracket is provided for each speaker
Note:
Be careful not to let the speaker system fall, it might cause damage
or serious injuries.
If you use another speaker system, please change the settings of
"Speaker" under "SETTINGS ON THE SET UP MENU" to the
proper settings for the speaker system (See Page 17 )
*
The SPS-80 is not available in some areas.
c 7