Assembling The Blades - Hunter TYPE E Series Installation And Operation Manual

Hunter fans use several styles of fan blade irons (brackets that hold the
blade to the fan).
6-1. Your fan may include blade grommets. If your fan has grommets,
insert them by hand into the holes on the blades.
6-2. Attach each blade to a blade iron using three blade assembly
screws (the carved side should face downward). If you used
grommets, the blades may appear slightly loose after screws are
tightened. This is normal.
6-3. For each blade, insert one blade mounting screw through the
blade iron, and attach lightly to the fan. Insert the second blade
mounting screw, then securely tighten both mounting screws.
6-4. Attach the fandangles (included) to the fan pull chains using the
plastic breakaway connector. (You may find the plastic breakaway
connector on the end of the extra chain.)
Use with grommet
Use without grommet
43113-01 • 05/04/12
Blade Assembly
Screws
Blade
Mounting
Screw
6 • Assembling the Blades
Step 6-1 (Detail)
Grommet
Step 6-3
Steps 6-1 – 6-2
9
Hunter® Fan Company