Table of Contents
Advertisement
Getting started
Battery installation and charging
Install the battery as shown below.
Step 1
Plug the battery connector
securely into the socket
inside the handset battery
compartment, matching
the color-coded label.
Insert the supplied battery
with the label THIS SIDE
UP facing up as indicated.
CHARGE light
After you install your telephone or power returns following a
power outage, the handset will prompt you to set the date and
time. For instructions, see Set date and time in the telephone
system user's manual for details. To skip setting the date and
time, press
IMPORTANT INFORMATION:
•
�se only the supplied rechargeable battery or replacement battery (model
�T166342). To order, visit our website at
1 (800) 222-3111
or call
•
If you do not use the handset for a long time, disconnect and remove the
battery to prevent possible leakage.
Step 3
Charge the handset by placing it
face up in the telephone base or
charger. The CHARGE light is on
when charging.
OFF/CANCEL or BACK.
www.telephones.att.com
. In Canada, dial
7
Step 2
Align the cover
flat against
the battery
compartment, then
slide it upwards
until it clicks into
place.
SET DATE
--/--/--
MM/DD/YY
BACK
SET TIME
--:-- --
BACK
1 (866) 288-4268
SET
SET
.
Advertisement
Table of Contents
