Display Messages; User Prompts And Condition Messages - AGFA W Class Operator's Manual

4.2 Display Messages

The printer displays several different types of information (if not in the menu
system or Quick Test Mode):
User Prompts and Condition Messages (also see Section 4.1.1 for a listing
of the Enter / Exit Prompts)
Application and Boot Loader Updating Messages (see Section 5.3 and 5.4)
Fault and Warning Messages (see Section 6.1)
4.2.1

User Prompts and Condition Messages

User Prompts alert the operator to a required action. Condition Messages are
used to indicate an operational state.
Displayed Message
!
!!
DMFBSJOH!GBVMUT!
!
!
!
DBMJCSBUJOH!
!
DBODFM!QSJOU!KPC@!
FOUFS!LFZ!>!ZFT
!
!
!
QBVTFE!
!
!
!
SFBEZ
!
48
User Prompts and Condition Messages
Description
The printer is trying to
clear a fault condition.
A media calibration is
being performed.
The CANCEL or
!
TEST key was pressed
during a batch job.
The printer is paused
or offline.
Ready Mode.
Condition(s)
Occurs when the FEED key
is pressed after the
correction of a fault.
The FEED key was pressed
and held.
The current print batch will
be cancelled if ENTER is
pressed; the remaining
labels will not be printed.
The printer is in a paused
condition.
Normal operating mode.
The printer is ready to
receive and process label
formats.
W-Class