AGFA W Class Operator's Manual page 122

To save a manually entered setup (for example, an application that required an
Advanced Entry Calibration before beginning) as a configuration file using the
front panel:
Step Displayed Message
1
!!
SFBEZ!
2
NFOV!NPEF!!
NFEJB!TFUUJOH
3
NFOV!NPEF!
TZTUFN!TFUUJOHT!
4
TZTUFN!TFUUJOHT!!
DPOGJHVSBUJPO!GJMF
5
DPOGJHVSBUJPO!GJMF!
SFTUPSF!BT!DVSSFOU
6
DPOGJHVSBUJPO!GJMF!
TBWF!TFUUJOH!BT
7
TBWF!TFUUJOH!BT!
!
}
8
TBWF!TFUUJOH!BT!!
TQFDJBM!}
9
TQFDJBM!TUPDL!
TVDDFTTGVM
112
Press the
Use the
!
to scroll to 'System
Settings'.
Press the
key to select 'System
Settings'.
Press the
!
key to select
'Configuration File'.
Press the
!
key to scroll to 'Save
Setting As'.
Press the
!
key.
Enter a file name using
the
scroll through the
characters.
select the delete function (solid flashing block)
and press the ENTER key.
Use the
!
to accept the character.
delete all entered characters in the file name
and press the ESCAPE key.
Press the
!
repeatedly to save the
file name and return to
'Ready'.
Operator Action
key.
key
key to
Note: To change an accepted character,
key
Note: To abort the "save setting" function,
key
Comment(s)
You are entering
'Menu Mode'.
The key can
also be used.
You are entering the
'System Settings'
menu.
You are entering the
'Configuration File'
submenu.
The key can
also be used.
Press the
to exit this selection.
The key can
also be used.
Continue entering the
file name in this
manner ("SPECIAL
STOCK" has been
used as an example).
Save complete. (To
restore a saved file
using the front panel
see Section 4.1.5.)
W-Class
key