Preparation Before Operation - Mitsubishi Mr.Slim MSZ-A09NA Operating Instructions Manual

NAME OF EACH PART
Remote controller
Signal transmitting section
Operation display section
ON/OFF (operate/
stop) button
Open the front lid.
(This diagram shows an overall view.)
(This diagram shows an overall view.)
Vane control button
Operation select button
ECONO COOL button
POWERFUL button
RESET button
4

PREPARATION BEFORE OPERATION

I
Auto restart function is ...
When the indoor unit is controlled with the remote controller, the operation mode, the set temperature and the fan speed are
stored in the memory. If a power failure occurs or the main power is turned off during operation, "Auto restart function" sets
automatically to start operating in the same mode as the one set with the remote controller just before the shutoff of the main
power. (Refer to page 6 for details.)
I
Temperature buttons
NOTE
Use the remote controller
provided with the unit only.
Do not use other remote
controller.
Fan speed control button
Off-timer button
On-timer button
TIME set buttons
Forward button
Backward button
CLOCK set button
Auto restart function
These models are equipped with an auto restart function. If you do not want to use this function,
please consult the service representative because the setting of the unit needs to be changed.
Breaker for the air conditioner
Turn the breaker on.