Table of Contents
Advertisement
Item
ALARM OUT
CONTROLLER & PTZ
SPOT OUT
CHANNEL
MOTION ZONE Select either Full Zone or Partial Zone for motion sensing.
MOTION SENSITIVITY Set the motion sensitivity for the specified channel.
KEY TONE
REMOTE CONTROL ID
SENSOR
2-4-1. ALARM-OUT
Item
ALARM OUT
Table 2.4.1. Menu items in Device Setup screen
Set the sensor, motion, and video loss for each alarm.
Set the Controller and PTZ camera speed, number, type and
ID.
Select specified channel for motion zone setup.
Control the motion sensitivity from 1 to 9.
Enable/disable key tone.
Select an ID of remote control.
1. Select ID.
2. Press the same number as ID set in DVR on a remote
control.
3. Then icon will be displayed on Live screen of DVR that
respond to the remote control.
The options are from 00 to 99
Select sensor NO from 1 to 10
TYPE Set the type of sensor for the specified channel. Options are:
OFF, N/O (normal open), and N/C (normal closed).
Figure 2.4.2. ALARM-OUT setup screen
Table 2.4.2. Menu item in ALARM-OUT Setup screen
Select an alarm out number.
Available NO: 4
Description
Description
29
Advertisement
Table of Contents
