Table of Contents
Advertisement
High and Super.
RECORDING Assign the recording mode for each channel. Options are: Continuous, By Motion, By
Sensor, By Schedule or Disable.
SENSOR
Enable setting up to 4 sensors for the specified channel using the control button (
▶ ▼
RECORDING
PRE RECORD Enable/disable pre-event recording. Pre-event recording time is 15 seconds to 20
minutes(Selectable)
POST EVENT
Set the post event recording time duration for the specified channel. (10-30 seconds)
RECORD
AUDIO Enable/disable audio recording for the specified channel.
SCHEDULE Set the recording schedule. Press SEL to go to schedule setup screen.
2-3-1. Recording Schedules
To setup a recording schedule, select SCHEDULE in the RECORD menu. Navigate through the items using
◀ ▲ ▶ ▼
the control button (
Once the channel 1 is selected, SCHEDULE-CH1 screen is displayed. Select ALL or each day using the
◀ ▲ ▶ ▼
control button (
.
C: CONTINUOUS recording, when you select the color will change to Blue Color
M: MOTION recording, when you select the color will change to Yellow Color
S: SENSOR recording, when you select the color will change to Red Color
-: Does not record
).
).
) and set the recording mode using the SEL button repeatedly
Figure 2.3.2. Schedule recording setup screen
27
◀ ▲
Advertisement
Table of Contents
