Table of Contents
Advertisement
Front panel
This section provides a brief reminder of the functions
provided by these controls.
Power switch (POWER)
1
Open this holder using the
Cassette holder
2
key. Insert cassettes tape side downwards, and close the
holder by hand.
Opens the cassette holder.
Tape EJECT key
3
Resets the tape counter to zero.
RESET key
4
When recording to cassette and this
REC MUTE key
5
key is pressed, the sound is muted for about four sec-
onds, and then the unit enters record standby mode.
Returns the tape to the zero position.
RTZ key
6
INPUT (cassette) control
7
the level fed to the cassette. Note that it has no effect
during automatic disc-to-tape dubbing if the menu item
bypassing the volume during dubbing is set to "through".
Repeated presses of this key cycles
INPUT 2 SEL key
8
between the different sources available for the cassette
recorder:
and
LINE2
DISC
DUB 2 TAPE<CD-RW key
9
matic recording from the disc to a cassette.
Provides information on the status of the cas-
Display
0
sette and disc transport and the selected input sources, etc.
DUB 1 TAPE>CD-RW key
q
matic recording from the cassette to a recordable disc.
Repeated presses of this key cycles
INPUT 1 SEL key
w
through the different sources available for the CD drive:
,
,
OPTICAL
COAXIAL
LINE 1
This rotary control affects the
INPUT (CD) control
e
level fed to the disc. Note that it has no effect during
automatic tape-to-disc dubbing if the menu item bypass-
ing the volume during dubbing is set to "through".
2 – Features of the CC-222@%^
Turns the unit on and off.
EJECT
This rotary control affects
.
Starts the process of auto-
Starts the process of auto-
,
, and
.
PHONO
TAPE
1 – Introduction
Starts recording from the phono source to
PHONO key
r
the cassette or disc recorder, depending on the selection
made in the menu system. See the appropriate sections
on recording to either tape or disc.
Disc OPEN/CLOSE key
t
Changes the time display for the disc
DISPLAY key
y
recording and playback.
Used when finalizing recordable discs.
FINALIZE key
u
Used when erasing data from CD-RW
ERASE key
i
discs.
Turns synchronized recording of the
SYNC REC key
o
disc recorder on and off.
Repeated presses of this key cycles through
MENU key
p
the different menu options.
Open and close this tray with the
Disc tray
a
key to load and unload discs.
CLOSE
Used to select and confirm menu settings
MULTI DIAL
s
etc. (turn to make the setting, push to confirm), and also
as a track search key when playing back discs.
REMOTE SENSOR window
d
signals from the remote control unit. Do not block this
window if you are using the remote control unit.
Rewinds the tape moving fast in the right-to-
REW key
f
left direction.
Forwards the tape moving fast in the left-to-
FFWD key
g
right direction.z
Stops the current tape transport operation.
Tape STOP key
h
Starts or resumes tape playback or
Tape PLAY key (˙)
j
recording, from right to left.
Starts or resumes tape playback or
Tape PLAY key (¥)
k
recording, from left to right.
Stands by for tape playback or record-
Tape PAUSE key
l
ing. Pressing this key again resumes the operation.
Opens and closes the disc tray.
OPEN/
Receives the infrared
11
TASCAM CC-222
IV
MK
Advertisement
Table of Contents
