Configuring Agents For Data Collection; Supported Rmon Agents And Interfaces - 3Com Traffix Transcend Traffix Manager User Manual

For windows nt
Table of Contents

Advertisement

6
Supported RMON
Agents and
Interfaces
C
ONFIGURING
C
OLLECTION
This chapter describes how to use Traffix
enable RMON agents on your network for data collection.
It contains the following sections:

Supported RMON Agents and Interfaces

Finding Agents for Data Collection
See
"RMON Overview"
agents.
Traffix Manager supports all agents which implement all the relevant
groups of RMON-1 and RMON-2 standards.
Refer to RFCs 1757, 2021 and 2074 for a list of the RMON groups which
are retrieved by Traffix Manager:
RMON-1 Request for Comment:
http://www.it.kth.se/docs/rfc/rfcs/rfc1757.txt
RMON-2 Request for Comment:
http://www.it.kth.se/docs/rfc/rfcs/rfc2021.txt
RMON-2 Protocol Identifiers:
http://www.it.kth.se/docs/rfc/rfcs/rfc2074.txt
See
Appendix F
for a list of interface types supported by Traffix Manager.
See
http://www.3com.com/network_management/probe_interop
list of third-party agents which are supported by Traffix Manager.
A
GENTS FOR
Manager to identify and
on
page 37
for more information about RMON
D
ATA
for a

Advertisement

Table of Contents
loading

This manual is also suitable for:

Transcend traffix manager 3.0

Table of Contents