Subnets Editor; Attribute Lookup; Dhcp Setup; Startup Options - 3Com Traffix Transcend Traffix Manager User Manual

1 Stop the Traffix Server. See
2 Copy your Traffix Manager database, using the Traffix Control Panel.
3 Restart the Traffix Server. See
4 You can then make a backup of the copy, while Traffix Manager can

Subnets Editor

Attribute Lookup

DHCP Setup

Startup Options

3Com recommends that you back up your database regularly, the
frequency depending on how important your trend data is to the way you
monitor your network. If you want to view and report on your weekly
data, you should back up your database once a week. If viewing and
storing your trend data is less important, backing up your database once
a month may be adequate.
To back up your database:
page 26.
continue to collect and store data in the "live" version.
Optimize databases
Optimize re-organizes the physical location of parts of the database so
that the database can be accessed more efficiently. It therefore works in
an similar way to the defragmentation utility in the Windows operating
system.
Allows you to group the devices on your network by subnet, and assign
default DNS domains, using the SubnetsDB file. See
SubnetsDB File" on page
Allows you to configure the user-defined attribute lookup programs. See
"Contents of the User-defined Attributes Configuration File"
page 138 for more information.
Controls the way that IP and MAC address mappings are obtained for
Windows DHCP devices.
See Appendix H, "DHCP", for more information.
Allows you to change the name of the Traffix Server. If you are running
more than one copy of Traffix Manager, you will have more than one
server running in the same network. Defining a server name allows you to
differentiate between Traffix Servers when multiple servers are in use.
Overview of Database Applications
"Stopping Traffix Manager"
"Launching the Traffix Manager Server"
133.
125
on page 28.
on
"Using the
on