Electrolux EWT 10320 W User Manual page 21

Problems
The E40 error code ap-
pears in the display
the Start/Pause pushbut-
***
ton flashes red :
The E20 error code ap-
pears in the display** and
the Start/Pause pushbut-
ton flashes red*** :
The E10 error code ap-
pears in the display** and
the Start/Pause pushbut-
ton flashes red*** :
The EF0 error code ap-
pears in the display** and
the Start/Pause pushbut-
ton flashes red*** :
The drainage pump runs
constantly, even when the
appliance is inactive :
Softener runs directly into
the drum when filling the
dispenser box :
* Depending on model.
**On some models, the audible signals can sound.
*** After solving any problems, press the 'Start/Pause' pushbutton to restart the
interrupted programme.
Causes
• the lid isn't closed properly.
**
and
• the drainage filter is obstructed,
• the drain hose is blocked or bent,
• the drain hose is fixed too high (see "Installa-
tion" section).
• the drainage pump is blocked,
• the standpipe is blocked.
• the water inlet tap is closed,
• the water supply has been cut off.
• the drainage filter is obstructed,
• the anti-flooding security system has been acti-
vated, please proceed as follows :
- close the water inlet tap,
- empty the appliance for 2 minutes before
unplugging,
- call the after-sales service.
• the anti-flooding security system has been acti-
vated, please proceed as follows :
- close the water inlet tap,
- empty the appliance for 2 minutes before
unplugging,
- call the after-sales service.
• you have gone past the MAX indicator.
operating problems 21