Electrolux EWT 10320 W User Manual page 10

10 how to run a wash cycle
progress, the appliance will ignore the
new selected programme. "Err" flashes
and the "Start/Pause"
flashes red for a few seconds then the
current cycle display reappears.
Selecting the temperature
Press the "Temperature"
pushbutton repeatedly to in-
crease or decrease the tem-
perature if you want your
washing to be washed at a
different temperature to the
one selected by the applian-
ce. The
cold wash.
Selecting the spin speed
Press the "Spin"
ton to change the spin
speed, if you want your
washing to be spun at a dif-
ferent speed to the one se-
lected by the appliance. You
can also select "No spin"*,
"Rinse hold"
ce plus"
The maximum speeds are :
for Cottons, Eco, Jeans, Handwash and
Wool : 1000 rpm,
for Synthetics, Easy iron, Lingerie and
Sport : 900 rpm,
for Delicates and Silk : 700 rpm.
*depending on model
At the end of the programme, if you have
selected "Rinse and hold" or "Night si-
pushbutton lence plus"
a "Spin"
finish the cycle.
"Night silence plus"
The washing machine does not empty
the water after the final rinse which pre-
vents the washing from creasing. Be-
cause there are no spin cycles, the
washing programme is very quiet and
can be selected at night. In Cotton and
Synthetics programmes, the rinsing cy-
symbol means a cle uses more water.
Selecting options
You must select the different options af-
pushbut- ter selecting the programme and before
pressing the "Start/Pause" pushbutton
(see "Programme table"). Press the de-
sired button(s) ; the corresponding lights
come on. If pressed again, the lights go
out. If one of the options is not compati-
ble with the selected programme, "Err"
*
or "Night silen- flashes on the display and the "Start/
*. Pause" pushbutton flashes red.
"Prewash" option
The appliance runs a prewash at 30°C
max. The prewash finishes with a short
spin cycle for cotton or synthetic pro-
grammes, and with an empty cycle for
delicates programmes.
, you then need to select
or "Drain" programme to