Setup - GE LP 33U Series Operating Manual

6.4

SETUP

The SETUP mode is entered any time the "SETUP" key is pressed.
This screen allows the user to modify some parameters permitting to adapt some functions of the UPS
to his/her needs, described as follows.
The LCD will display a series of screens containing the user parameters, accessible without password
protection.
In this mode the keys perform the following functions:
Return to HOME screen.
Scrolls backward to the previous screen.
Scrolls forward to the next screen.
Confirm selected choice of USER / SERVICE level.
Description of the keys to set or modify the parameters:
ESC Allows to exit a selected screen without making any modification.
Scrolls backward to the previous line.
Scrolls forward to the next line.
Allows to access a value to be set or modified.
Select, on the same line, the following value or letter to set or modify.
Set or modify the selected value.
Save the set or modified value and return to the selected screen.
It is possible to view any key functional description by pushing the key for more than 3 seconds.
Home\Setup
UPS IDENTIFICATION
ID :
Model :
S/N :
UPS SW Version :
Display SW Version :
Modifications reserved
OPM_LPS_3UO_50K_60K_1US_V010.doc
UPS 0
LP Series S1 60kVA
Q1060-2308-0001
xxx
xxx
UPS identification screen
ID Number of UPS in the RPA Parallel System (0
for single unit).
Model UPS model, series number and power range
The serial number.
S/N UPS
UPS SW The UPS software version.
Display SW The LCD display software version.
Page 35/65
Operating Manual LP 33U Series 30 & 40 kVA