GE LP 33U Series Operating Manual page 22

LED Stop Operation (red color)
It warns about the imminent inverter stop (default parameter = 3 min.) and the
consequent load shutdown as result of:
•
•
LED Alarm (yellow color)
It blinks when one or more alarm is activated. The internal buzzer is ON.
The LED Alarm remains lit (with the alarm condition still present) and the buzzer
stops when the key "MUTE" is pressed.
LED Alarm is lit when the load is not protected by UPS or in case Q1 is open.
LED Operation (green color)
When lit, indicates that the UPS is functioning correctly and the load is system
protected (Load supplied either from inverter or from Automatic Bypass in case of
ECO Mode functionality).
When blinking, indicates that a regular maintenance service is needed (SERVICE
REQUIRED).
May be reset by a service technician only.
See Section 9 – Maintenance – Service check.
The LED is OFF when the output switch Q1 is open, indicating that the Inverter is in
service mode, not supplying the load.
Modifications reserved
OPM_LPS_3UO_50K_60K_1US_V010.doc
The battery is fully discharged and the load cannot be transferred on utility.
Over temperature or overload condition (>125%) and the load cannot be
transferred on utility.
User LCD Interface
The user interface consists of a Back lit Graphic
Display (LCD) having:
Synoptic diagram indicating UPS status.
•
UPS operating,
•
information.
History of events (alarms and messages).
•
Functionality can be programmed to meet
•
customer needs by changing parameters.
Operation commands of the UPS.
•
AC and DC metering
Page 22/65
Operating Manual LP 33U Series 30 & 40 kVA