Securing Child In Infant Restraint - Graco 7586 Owner's Manual

5.2 Securing Child in Infant Restraint

Failure to properly secure your child in the infant restraint/carrier
increases the risk of serious injury or death from suffocation or
falls, or in the event of a sudden stop or crash. Even when used
only as a carrier, make sure the harness straps are properly
secured.
1. Move infant restraint handle to sitting position (see page 11).
2. Open harness clip by
squeezing both sides and
unbuckle as shown
3. Place your child in the infant
restraint as shown in
. Pull the harness straps
down over your child.
4. Follow directions for your
harness:
5.2.1 3-Point Harness: p. 29
5.2.2 5-Point Harness: p. 30
.
, not
28
OR