Temperature Ranges With A Remote Controller; Setting The Sound Volume (Voice Prompt); Setting The Clock - Rinnai REU-VAM1620W Operation And Installation Manual

Temperature Ranges With a Remote Controller

This water heater will attempt to provide hot water at the temperature setting even when the water flow is varied
or when more than 1 tap is in use. The water heater can deliver water at only one temperature setting at a time.
The available temperatures for a given model are provided below.
Model
V53e
Temp in Celsius ºC
Suggested temperatures are
•Kitchen 120 ºF (49º C)
•Shower 98º - 110º F (37º - 43º C)
•Bath Fill 102º - 110º F (39º - 43º C)
To change the temperature scale from Celsius to Fahrenheit or vice versa, press and hold the "On/Off" button for
5 seconds while the water heater is OFF.

Setting the Sound Volume (Voice Prompt)

MC-100V Press the "Function" button to
adjust the voice prompt
volume. The default sound
volume is set to Medium.
Each subsequent press of the
▲ or ▼ button cycles through
the volume levels in the order
below.
Medium Volume
(default)

Setting the Clock

MC-100V
Temperature Settings Available (ºF)
98 100 102 104 106 108 110 115 120 125 130 135 140
37 38 39 40
Off Volume
High Volume
Press the "Function" button twice within 10 seconds to set the clock. Press the ▲ or
▼ button to reach the desired time. The clock on the BC-100V automatically shows
the time which has been set on the MC-100V.
V53e Outdoor Manual
41 42 43 46
These temperatures are suggestions only.
A temperature lower than 98º F (37º C) can be
obtained at the tap by mixing with cold water.
BC-100V
Off Sound
(beep) (no beep)
49 52 54 57 60
Press the "Sound Vol." button to
adjust the voice prompt volume.
The default sound volume is set
to Medium. Each subsequent
press of the button cycles
through the volume levels in the
order below.
Low Volume
9