Table of Contents
Advertisement
U.S.
Component
Round Top Termination
Round Top Termination -
Extended
Flashing
Square Termination
Housing
Housing Extensions
Square Chase Termination
Adapter Kit
Chase Top Housing
Chase Top Housing
SK8 Chimney Sections
SK8 Chimney Elbows
Firestop
Chimney Support
20006811
ODSR Series "A" Outdoor Woodburning Fireplace
Chimney Components
Description
Top used to terminate chimney at roof.
(Flashing not included.)
Top used to terminate chimney at chase.
(Flashing not included.)
Metal finishing required around Contemporary
Termination to prevent rain leakage.
Top housing of simulated brick pattern
available in red, tan or white. Appropriate
adapter required. Flashing included.
Extends Square Termination housing on steep
pitched roofs.
Housing used to terminate chimney through
a chase top. Appropriate adapter required.
(Flashing not included.)
Unites Square Chase Termination with chimney
pipe (required for CT100 cap).
Low profile pyramid-style chimney cap used to
terminate chimney through a chase. Includes
adapter. (Flashing not included.)
Square chimney cap used to terminate chimney
through a chase. Terra Cotta Masonry. Includes
adapter. (Flashing not included.)
Pipe used to build 8" (SK8) flue systems.
Elbow used to create an offset in an 8"
chimney system. Only 30° elbows available.
Packaged 2 per carton (offset and return).
Required at each floor level of chimney
installation. (Plus attic on multi-story installation.)
Used to support chimney for each of: 30' vertical
height and 6' of angled chimney run.
Model Number
RLTSK8
RLTSK8L
8-6-12 with 8" flue:
0-6/12 pitch
8-12-12 with 8" flue:
6/12-12/12 pitch
S20B (R, T, W)
Must also include:
PLTSK8 or SLTSK8
202036
CT100
CTSK
PLTSK8
SLTSK8
SK81 (1' Long)
SK818 (1¹⁄₂' Long)
SK83 (3' Long)
SK84 (4' Long)
SK830-2
SKFS2A —
(8" straight flue)
SKFS6A —
(8" 30° inclined flue)
SKCS8
21
Advertisement
Table of Contents
