Create New Firewall Rules - Symantec Norton Personal Firewall 2003 User Manual

76 Guarding against intrusion attempts
Customize firewall rules

Create new firewall rules

Enable Automatic Program Control
See "Keeping
current with
LiveUpdate" on
page 53.
this type of communication are ignored if they appear below the first rule
that matches.
If no matching rule is found, the communication is blocked. Depending on
the Reporting level, an alert may appear.
Norton Personal Firewall includes Program Control, which helps you create
firewall rules as you use the Internet.
There are four ways to create firewall rules with Program Control:
Enable Automatic Automatically configures access for well-known programs
Program Control the first time that users run them. This is the easiest way to
set up firewall rules.
Use Program Scan Finds and configures access for all Internet-enabled
programs on a computer at once.
Manually add Closely manage the list of programs that can access the
programs Internet.
Respond to alerts Norton Personal Firewall warns users when a program
attempts to access the Internet for the first time. Users can
then allow or block Internet access for the program.
When Automatic Program Control is active, Norton Personal Firewall can
automatically configure Internet access settings for programs the first time
that they run. Automatic Program Control only configures Internet access
for the versions of programs that Symantec has identified as safe.
If an unknown program or an unknown version of a known program
attempts to access the Internet, Norton Personal Firewall warns the user.
The user can then choose to allow or block Internet access for the program.
Symantec regularly updates the list of recognized programs. You should
run LiveUpdate regularly to ensure that your list is up-to-date.