VuQube VQ3000 Operating Instructions Manual page 17

Portable in-motion automatic satellite system with built-in dvb for positive satellite identification
Table of Contents

Advertisement

1. Perform a stationary search as shown on the previous page.
2. Allow your programming to download.
3. Press
When the status light is steady green, the target satellite is found and the unit is tracking.
ALTERNATE SEARCH METHOD (Above method is the manufacturer's preferred method)
1. Press ON.
2. Press
. Before putting the vehicle into motion, wait for the status light to turn steady
green and your programming to download.
Note: While driving and in tracking mode, objects such as bridges, buildings and trees may occasionally block the
satellite signal from reaching the antenna. Line of sight obstructions may cause the picture on your TV to
freeze, pixel or be lost temporarily. PLEASE BE PATIENT. THE PICTURE WILL RETURN.
If the antenna does not sense vehicle motion after several minutes, it will enter sleep mode. The antenna
will automatically wake and begin tracking if it senses vehicle motion or a severe drop in satellite signal.
When you park for the evening or any extended period, it is recommended that you perform a stationary
search.
1. After you have properly configured the VuQube antenna for your satellite service, the
VuQube will automatically switch between satellites by simply selecting your desired
channel using the receiver's remote control.
.
Note: For better performance when using the automatic satellite switching feature, change channels by selecting
your program from the channel guide rather than channel surfing.
It is common for the picture to pixel or display an error message when the antenna is switching between
satellites, or the signal has been temporarily blocked. PLEASE BE PATIENT. THE PICTURE WILL
RETURN.
If an error message appears for an extended period, selecting CANCEL may help clear the message
more quickly.
Dish Network HD users: If you are unable to receive all of your HD programming, see Dish Network
HDTV: Changing the Satellite Trio on page 16.
IN-MOTION OPERATION
STATUS LIGHT
alternating colors
GREEN-flashing
GREEN-steady
AUTOMATIC SATELLITE SWITCHING
SYSTEM STATUS
initializing
potential satellite found
target satellite found (tracking)
Page 15

Advertisement

Table of Contents
loading

This manual is also suitable for:

V30

Table of Contents