Using Basic Phone Functions
Adjusting Call Volume and Muting
Adjusting Call Volume and Muting
Putting a Call on Hold
Resuming a Call
Ending a Call
Cisco Small Business IP Phone SPA 525G User Guide (SIP)
Adjusting Call Volume
To adjust the volume while you are on a call, press + on the Volume button to increase the
volume, or press - to decrease the volume. Press Save.
Pressing the Volume button while not on a call adjusts the volume of the phone's ringer.
Using Mute
To mute the phone microphone, speaker, or headset microphone, press the Mute button on the
phone. The button lights red. Press the Mute button again to unmute.
To put a call on hold, press the Hold button. A series of beeps indicates the call is on hold.
To resume the call, press the flashing red line button for the call. If you have multiple calls, all
calls are put on hold except the active call.
To end a call:
•
If you are using the handset, hang up.
•
If you are using the speakerphone, press the Speaker button.
•
If you are using the headset, either press the Headset button (wired) or replace the receiver
(wireless).
3
39