Configuring Date And Time Parameters On Your Phone - Cisco SPA 525G User Manual

Using Advanced Phone Features

Configuring Date and Time Parameters on Your Phone

Configuring Date and Time Parameters on Your Phone
STEP 1
STEP 2
STEP 3
STEP 4
NOTE
Cisco Small Business IP Phone SPA 525G User Guide (SIP)
The date and time for your phone normally come from the phone server. However, if you need
to change some date and time parameters, you can follow these steps:
Press the Setup button.
Scroll to Device Administration and press Select.
Scroll to Date/Time and press Select.
Scroll to the date and time setting that you want to change:
• Time Zone—Adds or subtracts hours to Greenwich Mean Time, or Western European
Time. Press the Right Arrow key to change the time zone. Press Save.
• Daylight Saving—Adjusts the time on your phone at the twice-yearly adjustment
intervals for Daylight Saving Time. Press the Right Arrow key to turn Daylight
Saving Time to On or Off.
• Automatic Mode—Configures your phone to receive the time and date from the
phone server. Press the Right Arrow key to turn automatic mode to On or Off. Press
Save.
• NTP Server 1 and NTP Server 2—Configures your phone to receive the time and
date from a Network Time Protocol server. Enter the name or the IP address of the
server and press Save.
• Set Current Time Manually—Press the Right Arrow key to choose the date and
time. Use the Right Arrow key to move between the year, month, date, hour, and
minute. Use the Up and Down Arrow keys to change the time. Press Set.
If your phone is connected to an administration server, any changes you make to the date and
time will be lost when rebooting the phone.
4
85