Using Basic Phone Functions
Placing or Answering a Call
Placing or Answering a Call
NOTE
Adjusting Call Volume and Muting
Cisco Small Business IP Phone SPA 525/SPA 525G2 User Guide (SPCP)
You may have to dial a number or numbers to reach an outside line. Ask your system
administrator.
Depending on the phone system setup, you may be able to place or answer calls
by using various methods.
To place or answer a call, do one of these tasks:
•
Pick up the receiver.
•
Press the Speaker button.
•
Press the Headset button.
•
Press a line button to place a call or a blinking line button to answer a call.
•
Dial the number, and then lift the handset.
•
Dial the number, and then press the Dial soft key.
•
Press the New Call soft key, and then dial.
•
Select a number from the directory, and then press the Dial soft key.
•
Press Redial to dial the last number that you called.
•
If you are on a call and another call comes in, press the Answer soft key to
place the current call on hold and answer the incoming call. To return to the first
call, select it using the Up Arrow key or the Down Arrow key and then press the
Resume softkey.
•
To place a new call while another call is active on the same line, press the Hold
button, and then press New Call and enter the number.
Adjusting Call Volume
To adjust the volume while you are on a call, press + on the Volume button to
increase the volume, or press - to decrease the volume. Press Save.
Pressing the Volume button while not on a call adjusts the volume of the phone's
ringer.
3
38