Cisco SPA 525G User Manual page 22

Getting Started
Using Phone Hardware and Accessories
STEP 5
STEP 6
STEP 7
NOTE
STEP 8
STEP 9
STEP 10
STEP 11
Cisco Small Business IP Phone SPA 525G User Guide (SIP)
Scroll to Bluetooth Mode and press the Right Arrow key to choose one of the following:
•
Phone—Your Cisco SPA 525G will pair with a Bluetooth headset only. Choose this
option if you will not use the Cisco SPA 525G with a Bluetooth-enabled mobile phone.
•
Both—Your Cisco SPA 525G will use a Bluetooth headset, or operate with your
Bluetooth-enabled mobile phone. (See
Bluetooth-Enabled Mobile Phone" on page 65
SPA 525G with your mobile phone.)
Your Cisco SPA 525G will connect to only one device at a time (either the
NOTE
Bluetooth headset or the Bluetooth-enabled mobile phone.)
If multiple Bluetooth devices are in range of the Cisco SPA 525G, the order of devices
in the Bluetooth Configuration > Bluetooth Profiles list is used, and the device with
a higher priority is activated first.
Scroll to Bluetooth Profiles and press the Right Arrow key to enter the profile screen.
Press Scan to scan for your headset.
Depending on the network environment (for example, the number of Bluetooth devices and
noise level), your Bluetooth headset may not appear on the found devices list. Ensure the
headset is powered on and has Bluetooth activated, and retry the scan.
In the list of found devices, select your headset and press the Select button to edit the profile.
Scroll to PIN and enter the PIN for your Bluetooth headset.
Scroll to Connect Automatically and press the Right Arrow key to turn to On.
Press Connect. The profile screen displays and a check mark appears next to the headset if the
connection was successful.
"Using the Cisco SPA 525G With Your
for more information on using the Cisco
1
19