Table of Contents
Advertisement
Taurus Super-S Combo
Your unit may come
with pre-installed
hard drives. Before
opening such an
enclosure, please
read the warranty
from your vendor
carefully, as this
could void your
warranty.
The aluminium
stand does not
have to be remo
ved
for drive assembly.
Drives with identical
capacities are
recommended.
Do not bend the
thermal sensor!
Chapter 2 - Hard Drive Assembly
1. Remove the four screws at the bottom of the case.
2. Push the inner enclosure out, and remove the outer chassis.
3. Install the first hard drive and mount it with two screws on
each side.
4. Attach the thermal probe with the tape provided to the first
HDD. Choose a place in between the two drives but without
damaging the probe when installing the second drive.
Page 5 / Chapter 2 - HDD Assembly
User Guide
Advertisement
Table of Contents
