Detailed View - Taurus Super-S Combo User Manual

Taurus Super-S Combo
To turn on the
power, press th e
ON/OFF switch fo r
3 seconds and
release it. To tur n it
off, press the
ON/OFF switc h,
hold it for 5 secon ds
and then release it
again.
The HDD LED will
turn red if there is
an error or the HDD
is not recognised.

Detailed View

Front View
1. ON/OFF switch (blue when ON)
2. LED indication
3. Ventilation holes
1
3
LED Indication
LED HDD Status
 OFF = Power off
 Green = HDD connected and ready
HDD1 CN2
 Red = Error or no HDD connected
 OFF = Power off
 Green = HDD connected and ready
HDD2 CN3
 Red = Error or no HDD connected
 OFF = Everything is working as expected
 Green = Rebuilding data from HDD1 to
Rebuild N/A
 Yellow = Rebuilding data from HDD2 to
Smart Fan
The smart fan automatically regulates the fan speed according
to the internal temperature. It will use low speed from 0-35
degrees, half speed from 36-45 degrees and full speed above
46 degrees Celsius.
Page 2 / Chapter 1 - Introduction
HDD2
HDD1
User Guide
2