Related Manuals for Sharp Aquos LC-32LD166K
Summary of Contents for Sharp Aquos LC-32LD166K
- Page 1 LC-32LD166K LC-42LD266K LC-46LD266K LC-50LD266K LCD COLOUR TELEVISION OPERATION MANUAL LC-32LD166K LC-42LD266K LC-46LD266K LC-50LD266K...
- Page 2 SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 5A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
-
Page 3: Table Of Contents
Subtitle Setup ������������������������������������������������ 8 Introduction Dear SHARP customer Thank you for your purchase of the SHARP LCD colour TV product� To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product�... -
Page 4: Important Safety Precautions
• Installing the LCD Colour TV requires special skill that should only be performed by qualified service personnel� Customers should not attempt to do the work themselves� SHARP bears no responsibility for improper mounting or mounting that results in accident or injury�... -
Page 5: Trademarks
Introduction WARNING To prevent the spread of fire, keep candles or other open flames away from this product at all times� “Excessive sound pressure from earphones and headphones can cause hearing loss� Adjustment of the equalizer to maximum increases the earphones and headphones output voltage and therefore the sound pressure level�”... -
Page 6: Remote Control Unit
Introduction Remote control unit VIDEO (ADJ) (k/l) Press to set the LCD TV to a Press to adjust the volume� predefined picture setting: 23. AUDIO (ADJ) Dynamic / Standard / Movie / Press to set the LCD TV to a Power Saver�... -
Page 7: Preparation And Watching Tv
Preparation and Watching TV Using the remote control Daily operation Use the remote control unit by pointing it towards the Turning on/off the power remote control sensor� Objects between the remote control unit and sensor may block proper operation� Turn on the power by pressing the button on the TV�... -
Page 8: Operation Without A Remote Control
Preparation and Watching TV Teletext Operation without a remote control Turning on and off Teletext 1� Select a TV channel or external source providing a Teletext programme� 2� Press TELETEXT to display Teletext� • Many stations use the TOP operating system, while some use FLOF (e�g�... -
Page 9: Picture
TV menu • Audio CH: Select the audio mode� Picture • Digital Output Type: Select the type of digital audio out� Adjust picture settings • HDMI 1 Input: Select to fit the input signal� • HDMI 2 Input: Select to fit the input signal� • Backlight: Change the level of backlight intensity�... -
Page 10: Update Ch
TV menu Sleep Timer switches the TV to standby after a E Update CH defined period of time� Update CH has similar function with Auto CH Search� The difference is you can update channel list NOTE without erasing the original information� • When you press any button on the remote control with less than 3 minutes left in the countdown, Sleep Timer E DVB-T Single RF Scan... -
Page 11: Connection Test
TV menu Select Auto to detect IP automatically, or select Manual Input Labels to enter IP Address, Netmask, Gateway, Primary DNS, and Secondary DNS� You can label each input source (except USB) with a * IP Address custom description� * Netmask * Gateway Icon Light Up Setting * Primary DNS... -
Page 12: Connecting A Usb Device Or External Devices
Connecting a USB device or external devices USB function Listen to Music This TV is equipped with a USB1�1 and USB2�0 Buttons for music mode: compatible connector that enables you to view photos, Buttons Descriptions listen to music, and play videos stored on a USB storage device�... -
Page 13: Inserting The Smartcard Into Ca Module
Connecting a USB device or external devices • Cables used to extend the USB device must be certified Checking CA module information as USB 2�0� • Video playback via a USB device may not be possible or After inserting and activating the CA module, make the playback quality affected if the device data transfer speed rating is too low�... -
Page 14: Appendix
Appendix Troubleshooting Problem Possible Solution No picture 1� Connect power cord correctly� 2� Turn on power� 3� Connect signal cable correctly� 4� Press any button on the LCD TV� Abnormal colours Connect signal cable correctly� Twisted picture 1� Connect signal cable correctly� 2�... -
Page 15: Specification
0°C to +40°C • As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice� The performance specification figures indicated are nominal values of production units� There may be some deviations from these values in individual units�... - Page 16 If the product is used for business purposes and you want to discard it: Please contact your SHARP dealer who will inform you about the take-back of the product� You might be charged for the costs arising from take-back and recycling� Small products (and small amounts) might be taken back by your local collection facilities�...
- Page 17 ( 732.6 ) / (( 967.6 )) / [ 1056.2 ] / [[ 1124.6 ]] ( 317.5 ) / (( 577.5 )) / [ 597.6 ] / [[ 597.6 ]] ( 704.6 ) / (( 938.1 )) / [ 1026.2 ] / [[ 1100.9 ]] ( 63.6 ) / (( 63.6 )) / [ 64.0 ] / [[ 62.0 ]] ( 53.0 ) / (( 78.0 )) / [ 118.0 ] / [[ 118.2 ]]...
-
Page 18: Sharp Corporation
SHARP CORPORATION SHARP ELECTRONICS EUROPE LTD.Furzeground Way, Stockley Park, Uxbridge, Middlesex, UB11 1EZ, U.K. http://www.sharp.eu Printed in Poland...