Table of Contents
Advertisement
Available languages
Available languages
1
2
3
4
5
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from
unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.
Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning your
machine.
After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.
For your own safety, do not connect the machine to the power source until the machine is
completely assembled and you read and understand the entire instruction manual.
6
7
8
9
10
Fig. 1B
ASSEMBLY
ASSEMBLY TOOLS REQUIRED
Open end wrenches 1/4", 3/8" and 1/2" (not included)
Hex Wrench (included)
Phillips and Flat Head Screwdrivers
ASSEMBLY TIME ESTIMATE
Assembly for this machine takes approximately 1-2 hours.
7 - English
Fig. 1B Hardware
11
1. 5/16"-23-2T Flat washer (12)
2. 5/16" Hex nut (22)
3. 5/16"- 1"L Hex head screw (6)
12
4. 5/16"-18-2T Flat washer (16)
5. 5/16"-1/2"L Carriage bolt (16)
6. Rubber foot (2)
13
7. 3/16" Hex nut
8. 3/16"-1/2"L Round head screw
14
9. 1/4" Hex nut
10. 1/4"-1/2"L Flat head screw
15
11. 5/8"-30- 3T flat washer (4)
12. Cotter pin (4)
13. 1/4"-15-1.5T flat washer
14. 1/4"-1/2"L Hex head screw (2)
15. 4mm Hex wrench
Advertisement
Table of Contents
