Reception Data - Yamaha dx100 Owner's Manual

4. Reception Data

All MIDI data is received when the MIDI ON/OFF function is ON. When a specific
MIDI receive channel has been selected using the MIDI R CH fuction, and the
OMNl mode is OFF, MIDI data will be recieved only on the specified channel.
MIDI data will be received on all channels when the OMNI mode is ON.
4-1. Channel Information
4-1-1 Channel Voice Message
(1) Key Off
Status
Note no.
Velocity
(2) Key On/Off
Status
Note no.
Velocity
The key on note level will vary according to the received velocity value (only when
the KEY VELOCITY setting is greater than 0). The range of this instrument is C#-1
to C7. If a higher or lower key number is received, it will be output within the range
limits. For example, received C#7 through C8 data will be output as notes in the
C#6 through C7 range.
(3) Control Change
Status
Control no.
Control code
a) Received whether MIDI CH INFO is ON or OFF
Control no.
C=64: Sustain sw.
b) Received when MIDI CH INFO is ON
Control no.
C=1: modulation wheel
C=2: breath control
C=5: portamento time
C=7: volume
C=65: portamento SW.
(4) Program Change
Status
Program no.
Recieved only in the PLAY mode when MIDI CH INFO is ON. Number 120 through
127 will be processed as 119.
(5) Pitch Bend
Status
Code(LSB)
Code(MSB)
5 0
1000nnnn(8n) n=channel no.
0kkkkkkk k=0(C-2) ~ 127(G8)
00000000(00)
1001nnnn(9n)
n=channel no.
0kkkkkkk
k=0(C-2) ~ 127(G8)
0vvvvvvv v=0: key off
v=1 ~ 127: key on
1011nnnn(Bn) n-channel no.
0ccccccc
0vvvvvvv
Control code.
V=0~126: OFF, 127: ON
Control code
V=0 ~127
V=0 ~127
V=0 ~127
V=0 ~127
V=0 ~126: OFF, 127: ON
1100nnnn(Cn) n=channel no.
0ppppppp
1110nnnn n=channel no.
0uuuuuuu
0vvvvvvv