Yamaha dx100 Owner's Manual page 44

Digital programmable algorithm synthesizer

Hide thumbs Also See for dx100:

Table of Contents

Add Amplitude Modulation to OP2

STEP 15:

As a final enhancement to our voice, let's add just a touch of amplitude modulation

to OP2—the main piano sound modulator. This will create a subtle chorus effect.

Select the LFO WAVE parameter, set to triangle.

Select the LFO SPEED parameter, set to 28.

Select the AMD (Amplitude Modulation Depth) parameter, set to 52.

Select the MODULATION SENSITIVITY, AMPLITUDE parameter, set to 1 for OP2

only (press the OPERATOR/AMS ON-OFF button).

Now try the voice. That's it! Name the new voice, if you like, by entering the

FUNCTION mode and using the VOICE NAME function. The only step that remains

is to store our new voice in a RAM memory location.

Store Completed Voice in RAM

STEP 16:

Press the INTERNAL button, then BEFORE DOING ANYTHING ELSE: hold down

the STORE button and press the voice selector to which you wish to store the

new voice.

As a final precaution, go back to the FUNCTION mode and turn

Table of Contents

Show Quick Links

Table of Contents