Table of Contents
Advertisement
SMPTE 310M Interface
1 Connect the output line to
your system under test to
the SMPTE OUT port.
4 Connect the SCSI 26-pin
male connector labelled SPI
Rx on the other end of the
DVB-SPI Y-Adapter cable to
the SPI interface DVB-SPI
Rx port.
To Connect to the SMPTE 310M Interface
The SMPTE 310M interface is a serial-to-parallel converter for the DVB-SPI
interface. It includes a DVB-SPI Y-Adapter cable to connect the SMPTE 310M
interface to the SPI interface.
3 Connect the single SCSI 50-pin
connector on one end of the
DVB-SPI Y-Adapter cable to the
SMPTE DVB-SPI IN/OUT port.
2 Connect the input line from
your system under test to
the SMPTE IN port.
DVB - SPI IN/OUT
DVB–SPI Rx
Getting Started
Connecting to Interfaces
5 Connect the other
SCSI 26-pin male
connector labelled
SPI Tx to the SPI
interface DVB-SPI
Tx port.
DVB–SPI Tx
2-9
Advertisement
Table of Contents
