Swing Operation; Economy Operation - Fujitsu ABBG 45 LRTA Operating Manual

SWING OPERATION

Begin air conditioner operation before performing this procedure.
To select SWING Operation
Press the SWING button.
Each time the SWING button is pressed, the swing operation will change in the following
order.
Up/down swing operation
Swing operation stops
To stop SWING Operation
Press the SWING button and select STOP.
Airflow direction will return to the setting before swing was begun.
About SWING Operation
● To select up/down swing operation
The type of operation
Cooling/Dry
Heating
Fan
● To select left/right swing operation
The type of operation
Cooling/Dry
Heating
Fan

ECONOMY OPERATION

Begin air conditioner operation before performing this procedure.
To Use the ECONOMY Operation
Press the ECONOMY button.
The ECONOMY indicator lamp (green) will light.
ECONOMY operation begins.
To Stop the ECONOMY Operation
Press the ECONOMY button again.
The ECONOMY indicator lamp (green) will go out.
Normal operation begins.
About ECONOMY Operation
At the maximum output, ECONOMY operation is approximately 70% of normal air conditioner operation for cooling and heating.
● If the room is not cooled (or heated) well during ECONOMY operation, select normal operation.
● During the monitor period in the AUTO mode, the air conditioner operation will not change to ECONOMY operation even if
ECONOMY operation is selected by pressing the ECONOMY operation button.
● When ECONOMY operation mode is operated, the room temperature will be little higher than the set-temp under cooling mode
and lower than set-temp under heating mode. Therefore, the ECONOMY mode is able to save more energy than other normal
mode.
En-12
Left/right swing operation
Up/down/left/right swing operation
Range of swing
1 to 4
3 to 5
1 to 5
Range of swing
1 to 5 (All range)
1 to 5 (All range)
1 to 5 (All range)
The SWING operation may stop temporarily when the air
conditioner's fan is not operating, or when operating at very
low speeds.
The SWING operation may stop temporarily when the air
conditioner's fan is not operating, or when operating at very
low speeds.