Table of Contents
Advertisement
ProxyServer User Guide
Introduction
A typical Telnet client application is described in this chapter. The ProxyServer 200-Series Proxy
Server has a built-in Telnet Server for access to the ProxyServer through Telnet clients. A typical
Telnet client is allowed to configure the Proxy Server and WAN devices. A typical TCP/IP program
group is shown below with a Tcpman icon and a Telnet icon.
For a detailed description of the Proxy Server software and individual parameters, refer to Chapter 4
in this User Guide.
The TCP/IP stack has to be loaded before the Telnet client can run. The Telnet client is a Windows
application. The Telnet Server option has to be selected from the Applications Setup dialog box using
the Proxy Server Configuration icon. Double click on the Telnet icon and a blank Telnet screen is
displayed. Click on Connection and a drop down menu is displayed. Click on Connect and the
Connect to remote host dialog box is displayed.
When the Connect to remote host dialog box is displayed, a Host address has to be entered. In this
example, the IP Host address is 192.168.0.1.
When you enter a host address and click on the OK button, the Proxy Server Management menu is
displayed.
Proxy Server Management Menu
The Proxy Server management menu provides two options; proxy server configuration and WAN
device configuration. The proxy server configuration options allow you to select the protocol stack,
high or low level device drivers, applications, proxy server, or system information. The WAN device
configuration allows you to gain access to the WAN ports.
40
MTPSR3-200
Advertisement
Table of Contents
