Ring; System Tones; Keyset Led Indications - Samsung DS 5021D KEYSET General Description Manual

3.5.2 RING

The output voltage and frequency of the ring signals in the OfficeServ 7100 are as follows:
• Output voltage: 75 Vrms Square Wave (4SLM)
• Frequency: 20 or 25 Hz
The OfficeServ 7100 provides the users with various tones to notify the users of the status of functional opera-
tions. The ON/OFF cycles of currently specified tones are shown in the table below.

3.5.3 SYSTEM TONES

TONE
DIAL TONE
BUSY TONE
DO NOT DISTURB TONE
RING BACK TONE
CALL PARK TONE
CONFIRMATION/CAUTION/BARGE-IN TONE
CALL BACK/HOLD TONE
RING BACK TONE
ERROR/NUMBER UNOBTAINABLE TONE
MESSAGE CAMP ON TONE
Note: The ON/OFF cycle can be adjusted by changing the values of the system database.

3.6 KEYSET LED INDICATIONS

CONDITION
LINE IDLE
LINE IN USE
RECALL
CALL ON HOLD
RINGING C.O. CALL
RINGING INTERNAL CALL
DND INDICATION
OPERATOR CALLS
ANS / RLS (DND)*
ANS / RLS (HANDSET MODE)**
*Overrides headset mode.
ON/OFF CYCLE
1000/250 ms
500/500 ms
250/250 ms
1000/2000 ms
CONTINUOUS
50/50 ms
500/3500 ms
1000/2000 ms
250/250 ms
CONTINUOUS
LED COLOR LED ON
OFF
RED / GREEN STEADY
AMBER 500 ms
RED / GREEN 500 ms
GREEN 100 ms
GREEN 100 ms
RED 112 IPM for 500 ms
RED 100 ms
RED 112 IPM for 500 ms
RED STEADY
3.3
Home Page
LED OFF
— OFF
—
500 ms
500 ms
100 ms
100 ms
500 ms
100 ms
500 ms
—
Table of Contents