Ring Type; Ring Tone - Samsung WIP-500M User Manual

[MENU] 3. Soft Keys [OK]
1. Group Conf [OK] 2: Save
Name [OK] Enter Phone Number of Member
Enter Phone Number of Next Member
Entering Each Member
You can have a conference by entering directly phone number of each member.
[MENU] 3. Soft Keys [OK]
2. Conference [OK] Enter Phone Number of Member
[OK] Enter Phone Number of Next Member
• The mark means that you have completed entering the phone number.
• The mark means that you have failed the call connection.
• The mark means that you have connected with the member.
You can retrieve a conference group or a phone number saved in the
phone by pressing [MENU] button at the phone number entry
screen.
40
4. Conference [OK]
[OK] Entering Group
[OK]
4. Conference [OK]
[OK]
Home Page
VOLUME/RING
Press the [MENU] button in idle mode, and then select the [4. Volume/Ring]
icon.
You can press the
function.

Ring Type

You can select the modes of call sound such as the ring, vibration, ring after vibra-
tion.
[MENU] 4. Volume/Ring
(Ring/Vibrate/Vibrate & Ring)
For information about how to set the vibration mode, refer to the
description of 'Setting the Vibration Mode' section in 'Basic Features'
of this guide.

Ring Tone

This function enables you to select one bell melody out of a selection of 10
melodies.
[MENU] 4. Volume/Ring
(Select Melody)
Table of Contents WIP-5000M Guide
in idle mode to perform the same
[OK] 1. Ring Type [OK]
[OK]
[OK] 2. Ring Tone [OK]
[OK]
41