Factory default
If you have altered any settings from
the factory default, you can re-set them
back to the factory default settings.
Switch the dishwasher off with the
button, if it is switched on.
Press the Start button in and whilst
holding it in switch the dishwasher
on using the On button
Keep the Start button pressed in for
at least four seconds until the Start
indicator light comes on.
If this does not happen, start the
procedure from the beginning again.
Programme options
Press the button 9 times.
The indicator will do 1 long flash and
9 short flashes at intervals.
The flashing sequence in the display
indicates whether a setting has been
changed from its factory default.
– : All settings are set to factory
default settings.
– : At least one setting has been
changed.
To reset the dishwasher to the factory
default settings, press the Start
button.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
55