Table of Contents
Advertisement
BLEACH DISPENSER OUTLET VALVE
(with Back-Flow Restrictor)
FABRIC SOFTENER DISPENSER OUTLET VALVE
DETERGENT DISPENSER OUTLET VALVE
FRESH WATER OUTLET VALVE
(with Back-Flow Restrictor and Thermistor)
COLD WATER INLET VALVE
HOT WATER INLET VALVE
1.
Shut off the water supply and disconnect
the hot and cold inlet hoses.
2.
Remove the two (2) hex-head screws
securing the valve assembly to the
feature panel. (Fig. 11) The assembly
will remain in place until it is lifted slightly.
3.
Disconnect all wiring harness plugs from
the four (4) outlet valve solenoids and the
two inlet solenoids, making note of their
locations.
4.
Disconnect the four (4) outlet hoses from
the four (4) outlets.
5.
Lift the assembly to disengage the mount-
ing bracket ears from the slots in the fea-
ture panel and remove the assembly.
Fig. 10
21
Fig. 11
Hide quick links:
Advertisement
Table of Contents
