Table of Contents
Advertisement
Choosing Options
Use the OPTIONS control to select the desired options for the wash cycle.
CATALYST CLEANING™
CATALYST CLEANING™ allows detergent to soak and penetrate the entire load giving im-
proved stain and soil removal. This option will last one (1) to five (5) minutes depending on the
cycle selected. The washer then stops spinning and fills to the selected water level and con-
tinues washing with the selected cycle.
SOAK
This option should be used for set-in stains and soils that needs extra time for removal. The SOAK
option can be used in two (2) different ways:
•
Choosing SOAK with a cycle gives a brief period of soak added to the wash cycle.
•
Choosing SOAK alone gives up to 60 minutes of soak time.
RINSE OPTIONS
STAND ALONE CYCLES:
•
DRAIN/SPIN - This cycle will drain the water and spin the load. The spin will be 6 minutes at
high speed.
•
RINSE/SPIN - This option will provide a deep rinse with low-speed agitation followed by a
drain and a two-step spin. (Spin begins at high-speed and steps down to low-speed. The time
display will include an estimate of how long it will take to fill and drain the water.
SELECTED WITH ANOTHER CYCLE:
•
DRAIN/SPIN-This option will provide an additional six minutes to the spin. The spin speed will
depend on the cycle selected.
•
RINSE/SPIN-This option provides a second deep rinse with the same water temperature as
selected for the first rinse. A second rinse can be added to any main wash cycle.
Choosing Modifiers
These controls allow the selection of desired Water Level, Wash and Rinse Temperatures, Agitation
Time, or End of Cycle Signal volume for your wash cycle.
SOIL LEVEL
The Soil Level option will add or subtract agitation time, depending on whether "more" or "less" soil is
selected.
9
Hide quick links:
Advertisement
Table of Contents
